BOOK VOLUMES
EDITED Moon, T. J., and Ghasemi Nejhad, M. N. "Mechanics of Materials Processing and Manufacturing," Proceedings of ASME 1994 International Mechanical Engineering Congress and Exhibition (IMECE) , Applied Mechanics Division, AMD-Vol. 1994
PUBLICATIONS Ghasemi Nejhad, M. N., Chandramouli, M. V., and Yousefpour, A., "Processing and Performance of Continuous Fiber Ceramic Composites by Preceramic Polymer Pyrolysis: I - Filament Winding," Journal of Composite Materials, in press, 2001 Ghasemi Nejhad, M. N., Bayliss, J. K., and Yousefpour, A., "Processing and Performance of Continuous Fiber Ceramic Composites by Preceramic Polymer Pyrolysis: II - Resin Transfer Molding," Journal of Composite Materials, in press, 2001 Yousefpour, A., and Ghasemi Nejhad, M. N. "Experimental and Computational Study of APC-2/AS4 Thermoplastic Composite C-Rings," Journal of Thermoplastic Composite Materials, in press, 2001 Yousefpour, A., and Ghasemi Nejhad, M. N., "Processing and Performance of Continuous Fiber Ceramic Composites by Preceramic Polymer Pyrolysis and Inactive Fillers," Composites Science and Technology, accepted for publication, 2000 Yousefpour, A., and Ghasemi Nejhad, M. N., "Effects of Geometric Optimization of Tapered End-caps on the Performance of Thick Thermoplastic Composite Cylinders under External Hydrostatic Pressure," Journal of Thermoplastic Composite Materials, submitted for publication, 2000 Ng, R.K., Yousefpour, A , Uyema, M., and Ghasemi Nejhad, M. N., "Design, Analysis, Manufacture, and Test of Shallow Water Pressure Vessels Using E-Glass/Epoxy Woven Composite Material for a Semi-Autonomous Underwater Vehicle," Journal of Composite Materials, submitted for publication, 2000 Ghasemi Nejhad, M. N., Pan, C., and Feng, H., "Intrinsic Strain Modeling and Residual Stress Analysis for Thin Film Processing of Layered Structures," ASME Journal of Electronic Packaging, submitted for publication, 2000 Chung, W. J., Feng, H., Pan, C., von Preissig, F. J., Ghasemi Nejhad, M.N., and Yuh, J. "Finite Element Analysis for Virtual Rapid Prototyping of Piezoelectric Microelectromechanical Systems," Journal of Finite Elements in Analysis and Design, submitted for publication, 2000 Ghasemi Nejhad, M. N., and Ikeda, K. M. "Design, Manufacture, and Characterization of Recycled Thermoplastic Powder Impregnated Fibers Using In-Situ Composites Filament Winding," Journal of Thermoplastic Composite Materials, Vol. 11, No. 6, Nov. 1998, pp. 533-572 Ghasemi Nejhad, M. N. "Thermal Analysis for Thermoplastic Composite Tow/Tape Preheating and Pultrusion," Journal of Thermoplastic Composite Materials, Vol. 10, No. 6, Nov. 1997, pp. 504-523 Phelan, P. E., and Ghasemi Nejhad, M. N. "Residual Stresses for In-Situ Deposition of Thin-Film High-Temperature Superconductors," ASME Journal of Electronic Packaging, Vol. 116, No. 4, December 1994, pp. 249-257 Ghasemi Nejhad, M. N., Gillespie, J. W., Jr., and Cope, R. D. "Effects of Processing Parameters on Material Responses during In-Situ Filament Winding of Thermoplastic Composites," International Journal of Materials and Product Technology, Concurrent Engineering of Advanced Materials-Integration of Mechanics and Manufacturing, Vol. 9, Nos. 1/2/3, 1994, pp. 183-214 Ghasemi Nejhad, M. N. "Issues Related to Processability during the Manufacturing of Thermoplastic Composites Using On-Line Consolidation Techniques," Journal of Thermoplastic Composite Materials, Vol. 6, No. 2, April 1993, pp. 130-146 Ghasemi Nejhad, M. N., Cope, R. D., and Geri, S. I. "Thermal Analysis of In-Situ Thermoplastic-Matrix Composite Filament Winding," ASME Journal of Heat Transfer, Vol. 113, No. 2, May 1991, pp. 304-313 Ghasemi Nejhad, M. N., Cope, R. D., and Geri, S. I. "Thermal Analysis of In-Situ Thermoplastic Composite Tape Laying," Journal of Thermoplastic Composite Materials, Vol. 4, No. 1, Jan. 1991, pp. 20-45 Ghasemi Nejhad, M. N., and Chou, T-W. "A Model for the Prediction of Compressive Strength Reduction of Composite Laminates with Molded-in Holes," Journal of Composite Materials, Vol. 24, No. 3, March 1990, pp. 236-255 Ghasemi Nejhad, M. N., and Chou, T-W. "Compression behavior of woven carbon fibre-reinforced epoxy composites with moulded-in and drilled holes," Composites, Vol. 21, No. 1, Jan. 1990, pp. 33-40 Ghasemi Nejhad, M. N., and Parvizi-Majidi, A. "Impact behavior and damage tolerance of woven carbon fibre-reinforced thermoplastic composites," Composites, Vol. 21, No. 2, March 1990, pp. 155-168
CONFERENCE
PUBLICATIONS Ghasemi Nejhad, M. N., Chandramouli, M. V., and Wereszczak, A. A., "Processing and Performance of SiC/BlackglasTM CFCCs Using Filament Winding," 1996 Conference and Exposition on Composites, Advanced Ceramics, Materials and Structures, Ceramic Engineering & Science Proceedings, in press Li, D. R., Phelan, P. E., and Ghasemi Nejhad, M. N. "Infrared Radiative Properties of Polyetherimide Thermoplastic Films," Proc. of ASME International Mechanical Engineering Congress and Exposition (IMECE), Nov. 1995 Ghasemi Nejhad, M. N. "Thermal Analysis for Thermoplastic Composite Tow Preheating and Pultrusion," Proceedings of ASME 1994 International Mechanical Engineering Congress and Exposition (IMECE), Mechanics in Materials Processing and Manufacturing, Moon T. J. and Ghasemi Nejhad M. N., Eds., AMD-Vol. 194, Nov. 1994, pp. 57-69 Knapp, R. H., Ghasemi Nejhad, M. N., and Matsunaga, K. T. "Assistive Devices in a Capstone Design Course," Proceedings of RESNA Annual Conference, RESNA '93, June 1993, pp. 220-222 Chung, W. J., Feng, H., von Preissig, F. J., Ghasemi Nejhad, M.N., and Yuh, J. "Development of a Finite Element Analysis-Based Numerical Solution for Virtual Rapid Prototyping of Piezoelectric Micromechanical Systems," Proceedings of 1996 ASME IMECE Symposium on Mechanics in MEMS, Atlanta, GA, 1996, accepted for publication Ghasemi Nejhad, M. N., Gillespie, J. W., Jr., and Cope, R. D. "Prediction of Process-Induced Stresses for In-Situ Thermoplastic Filament Winding of Cylinders,"Proceedings of Third International Conference CADCOMP ,Computer Aided Design in Composite Material Technology, May 1992, pp.225-253 Phelan, P. E., and Ghasemi Nejhad, M. N. "Residual Stresses for In-Situ Deposition of Thin-Film High-Temperature Superconductors," ASME Winter Annual Meeting 1993 Conference Paper, 93-WA/AES-4, Nov.28-Dec. 3, pp. 1-11 Ghasemi Nejhad, M. N., Gillespie, J. W., Jr., and Cope, R. D. "Processing Stresses for In-Situ Thermoplastic Filament Winding Using the Divergence Method," Proceedings of ASME Winter Annual Meeting 1992, Heat Transfer Effects in Materials Processing, Geri, S. I., and Alam M. K., Eds., HTD-Vol. 233, November 1992, pp. 33-43 Ghasemi Nejhad, M. N. "Processability in On-Line Consolidation of Thermoplastic Composites," Proceedings of First International Conference on Transport Phenomena in Processing, (PIThE), March 1992, pp. 1313-1329 Ghasemi Nejhad, M. N., Cope, R. D., and Geri, S. I. "Heat Transfer Analysis for In-Situ Thermoplastic Filament Winding," Proceedings of AIAA/ASME Joint Thermophysics and Heat Transfer Conference, Transport Phenomena in Material Processing, Charmchi, M., Chyu, M. K., Joshi Y., and Walsh, S. M., Eds., HTD-Vol. 132, 1990, pp. 119-130